EPDM - Roofing membrane

Water-damming layer for flat and slightly pitched roofs

Extremely flexible roofing membrane, insensitive to UV radiation and ozone, for flat and slightly pitched roofs.

Pandser EPDM roofing membrane is a 1.14 mm thick foil made of synthetic rubber. This material is extremely flexible and insensitive to UV radiation and ozone. EPDM roofing membrane is suitable for flat and slightly pitched roofs. This could either be a green roof, a weighted system or a fully adhesively bond system.

EPDM sheets larger than the maximum widths we are able to produce by default, are called roof membranes. The vulcanized joints between the strips of foil eliminate the need for professionals to make a joint connection and make it possible to seal a roof in one go.

Characteristics of Pandser EPDM roofing membrane

Proven lifespan of min. 50 years
Root resistant and suitable for green roofs
Permanently elastic (> 400% elongation)
Can be applied without an open flame
UV and ozone resistant
Resistant to temperatures from -35 to +120 degrees

Processing

Make substrate free of splinters and dust
Always press/roll after bonding
Use Pandser marking pen for marking out
Roof surface with spray adhesive (Pandser Spraybond)
Roof curb and upstand with contact adhesive (Pandser Bonding adhesive)
Spray/lubricate both substrate and EPDM

Choose an application

Roof

Floor

Facade

Gutter

Range

Thicknesses

1.20 mm

Widths

Ranging from 2.8 m to 7 m

Delivery project-based per roll or m²

Per roll, in m² or one piece

Available dimensions and thicknesses

PANDSER EPDM roofing membrane	1.20 mm
3 m x 4.2 m
3 m x 5.6 m
3 m x 7 m
4.5 m x 7 m
2.8 m x 30 m
2.8 m per m²
3.5 m x 30 m
3.5 m per m²
4.2 m x 30 m
4.2 m per m²
5.6 m x 30 m
5.6 m per m²
7 m x 30 m
7 m per m²

View all dimensions and thicknesses

Back to the overview